Browse by Research Centres and Groups

Up a level
Export as [feed] RSS
Group by: Authors | Item Type | No Grouping
Jump to: A | C | D | F | G | I | K | M | O | P | R | S | T | U | Y
Number of items at this level: 36.

A

Ahmadi Moghaddam, Hadi, Sarmadian, Alireza and Shafaee, Maziar (2019) An experimental study on condensation heat transfer characteristics of R-600a in tubes with coiled wire inserts. Applied Thermal Engineering. ISSN 1359-4311

Ahmadi Moghaddam, Hadi, Sarmadian, Alireza, Shafaee, Maziar and Enayatollahi, Hamid (2019) Flow pattern maps, pressure drop and performance assessment of horizontal tubes with coiled wire inserts during condensation of R-600a. International Journal of Heat and Mass Transfer, 148. a119062. ISSN 0017-9310

Alimardani, Farzam, Ahmadi Moghaddam, Hadi, Sarmadian, Alireza and Shafaee, Maziar (2019) Pressure loss and performance assessment of horizontal spiral coil inserted pipes during forced convective evaporation of R-600a. International Journal of Refrigeration. ISSN 0140-7007

C

Catak, Jale, Develi, Ahmet Cagri, Sorguven, Esra, Ozilgen, Mustafa and Inal, H. Serap (2015) Lifespan entropy generated by the masseter muscles during chewing: an indicator of the life expectancy? International Journal of Exergy, 18 (1). pp. 46-67. ISSN 1742-8297

D

Degerli, Bahar, Nazir, Serap, Sorgüven, Esra, Hitzmann, Bernd and Özilgen, Mustafa (2015) Assessment of the energy and exergy efficiencies of farm to fork grain cultivation and bread making processes in Turkey and Germany. Energy, 93 (1). pp. 421-434. ISSN 0360-5442

F

Fazeli, Seyed Mostafa, Kanjirakkad, Vasudevan and Long, Christopher (2021) Experimental and computational investigation of flow structure in buoyancy dominated rotating cavities. ASME 2020 Turbo Expo, Virtual Conference, 21-25 September 2020. Published in: Journal of Engineering for Gas Turbines and Power. 7C aGT2020-14683. ASME ISBN 9780791884188

Fazeli, Seyed Mostafa, Kanjirakkad, Vasudevan and Long, Christopher (2020) Experimental and computational investigation of flow structure of buoyancy induced flow in heated rotating cavities. GPPS Chania20, Online conference, 7-9 September 2020. Published in: Proceedings of Global Power and Propulsion Society. 1-14. GPPS ISSN 2504-4400

G

Günter, Marcel, Hammer, Frank, Koch, Christian, Kuhn, Klaus, Rose, Martin G and Staudacher, Stephan (2017) Application of a miniaturized solid state electrolyte sensor for tracer gas measurements in a two-stage low pressure turbine. Experimental Thermal and Fluid Science, 82. pp. 367-374. ISSN 0894-1777

I

Irps, T J B and Kanjirakkad, V (2019) On the propagation of two types of disturbances through a laminar boundary layer subjected to separation and transition. In: IUTAM symposium on Laminar-Turbulent Transition 2019, 02-06 Sept 2019, Imperial College, London.

K

Kanjirakkad, V (2017) Experimental study of endwall flow in a low-speed linear compressor cascade: effect of fillet radius. International Journal of Turbines and Sustainable Energy, 1 (1). pp. 1-7.

Kanjirakkad, Vasudevan (2017) Experimental study of endwall flow in a low-speed linear compressor cascade: effect of over-tip leakage. International Journal of Turbines and Sustainable Energy, 1 (1). pp. 8-14.

Kücük, Kubra, Tevatia, Rahul, Sorgüven, Esra, Demirel, Yasar and Ozilgen, Mustafa (2015) Bioenergetics of growth and lipid production in Chlamydomonas reinhardtii. Energy, 83. pp. 503-510. ISSN 0360-5442

M

Mashouf, H, Shafaee, M, Sarmadian, A and Mohseni, S G (2017) Visual study of flow patterns during evaporation and condensation of R-600a inside horizontal smooth and helically dimpled tubes. Applied Thermal Engineering, 124. pp. 1392-1400. ISSN 1359-4311

Mustaffa, A F and Kanjirakkad, V (2021) Single and multiple circumferential casing groove for stall margin improvement in a transonic axial compressor. ASME 2020 Turbo Expo, Virtual Conference, 21-25 September 2020. Published in: Proceedings of the ASME Turbo Expo 2020. 2A aGT2020-14974. ASME ISBN 9780791884065

Mustaffa, A F and Kanjirakkad, V (2020) Stall margin improvement in a low-speed axial compressor rotor using a blockage-optimised single circumferential casing groove. GPPS Chania20, Online conference, 7-9 September 2020. Published in: Proceedings of Global Power and Propulsion Society. 1-10. GPPS ISSN 2504-4400

Mustaffa, Ahmad Fikri and Kanjirakkad, Vasudevan (2020) Casing-groove optimisation for stall margin in a transonic compressor rotor. International Journal of Numerical Methods for Heat and Fluid Flow. ISSN 0961-5539

Mustaffa, Ahmad Fikri and Kanjirakkad, Vasudevan (2019) Design optimisation of circumferential casing groove for stall margin improvement in a transonic compressor rotor. In: 54th 3AF International Conference on Applied Aerodynamics AERO2019, 25-27 March 2019, Paris.

O

Ozilgen, Mustafa and Sorguven Oner, Esra (2016) Biothermodynamics: principles and application. CRC Press. ISBN 9781466586093

P

Pak, Ruhan, Ocak, Zeynep and Sorgüven, Esra (2018) Developing a passive house with a double-skin envelope based on energy and airflow performance. Building Simulation, 11 (2). pp. 373-388. ISSN 1996-3599

Payne, Daniel and Kanjirakkad, Vasudevan (2021) Experimental investigation on the effect of varying purge flow in a newly commissioned single stage turbine test facility. ASME 2020 Turbo Expo, Virtual Conference, 21-25 September 2020. Published in: Proceedings of the ASME Turbo Expo 2020. 7C aGT2020-14975. ASME ISBN 9780791884188

Payne, Daniel and Kanjirakkad, Vasudevan (2016) Measurement of clearances using capacitive proximity sensors in turbine rotor stator cavities. In: XXIII Biennial Symposium on Measuring Techniques in Turbomachinery, 1 - 2 September 2016, Stuttgart, Germany.

Puttock, Mark and Rose, Martin (2016) Measurement of thermal wakes in compressor secondary air systems using low frequency thermocouple data. In: XXIII Biannual Symposium on Measuring Techniques in Turbomachinery, 1-2 September 2016, Stuttgart, Germany.

Puttock-Brown, M R and Long, C A (2021) Heat transfer analysis in a rotating cavity with axial through-flow. ASME Turbo Expo 2020: Turbomachinery Technical Conference and Exposition, London, United Kingdom, September 21 – 25, 2020. Published in: Proceedings of ASME Turbo Expo 2020: Turbomachinery Technical Conference and Exposition. 7C aGT2020-14994. ASME ISBN 9780791884188

Puttock-Brown, M R and Rose, M G (2018) Formation and evolution of Rayleigh-Bénard streaks in rotating cavities. ASME Turbo Expo 2018: Turbomachinery Technical Conference and Exposition GT2018, Oslo, Norway, 11-15 June 2018. Published in: Proceedings of ASME Turbo Expo 2018: Turbomachinery Technical Conference and Exposition GT2018. 5B American Society of Mechanical Engineers

Puttock-Brown, M R, Rose, M G and Long, C A (2017) Experimental and computational investigation of Rayleigh-Bénard flow in the rotating cavities of a core compressor. Turbo Expo 2017: Turbine Technical Conference and Exposition, Charlotte, North Carolina, USA, 26-30 June, 2017. Published in: ASME Turbo Expo 2017: Turbomachinery Technical Conference and Exposition. 1-14. American Society of Mechanical Engineers, New York. ISBN 9780791850886

R

Rogers, R H (1985) Computation of heat transfer in a rotating cavity with a radial outflow of coolant. Part 1: The symmetrically-heated cavity. Technical Report. University of Sussex, Brighton.

Berns Engineering Consulting GMBH (CH); Rose, Martin; Weigel, Björn; Eichler, Christian; Staudacher, Stephan (2016) Fast response temperature measurement within a gas turbine. US 13/377,461.

Rose, Martin G and Marx, Martin (2014) Unsteady work transfer within a turbine blade row passage. Journal of Turbomachinery, 136 (9). 091001 1- 12. ISSN 0889-504X

S

Sarmadian, A, Shafaee, M, Mashouf, H and Mohseni, S G (2017) Condensation heat transfer and pressure drop characteristics of R-600a in horizontal smooth and helically dimpled tubes. Experimental Thermal and Fluid Science, 86. pp. 54-62. ISSN 0894-1777

Schneider, C M, Schrack, D, Kuerner, M, Rose, M, Staudacher, S, Guendogdu, Y and Freygang, U (2014) On the unsteady formation of secondary flow inside a rotating turbine blade passage. Journal of Turbomachinery, 136 (6). 061004 1-10. ISSN 0889-504X

Shafaee, M, Mashouf, H, Sarmadian, A and Mohseni, S G (2016) Evaporation heat transfer and pressure drop characteristics of R-600a in horizontal smooth and helically dimpled tubes. Applied Thermal Engineering, 107. pp. 28-36. ISSN 1359-4311

Shang, Yeru and Sorguven, Esra (2018) The effect of sub-grid scale models on the Large Eddy Simulation of a corrugated channel flow. The 13th OpenFOAM Workshop, Shanghai, China, June 24-29 2018. Published in: Wan, D C, Wang, J H, Zhao, W W, Deng, D and Wang, Z, (eds.) Proceedings of The 13th OpenFOAM Workshop. 449-452. Computational Marine Hydrodynamics Lab, Shanghai Jiao Tong University, Shanghai, China.

Sorguven Oner, Esra and Ozilgen, Mustafa (2015) First and second law work production efficiency of a muscle cell. International Journal of Exergy, 18 (2). pp. 142-156. ISSN 1742-8297

T

Tang, H, Puttock-Brown, M R and Owen, J M (2018) Buoyancy-induced flow and heat transfer in compressor rotors. Journal of Engineering for Gas Turbines and Power, 140 (7). 071902 1-10. ISSN 0742-4795

U

Unal, Efe, Ahn, Hojin and Sorguven, Esra (2016) Experimental investigation on flows in a corrugated channel. Journal of Fluids Engineering, 138 (7). ISSN 0098-2202

Y

Yalçınkaya, Bahar Hazal, Erikli, Şükrü, Özilgen, Burak Arda, Olcay, Ali Bahadır, Sorgüven, Esra and Özilgen, Mustafa (2016) Thermodynamic analysis of the squid mantle muscles and giant axon during slow swimming and jet escape propulsion. Energy, 102. pp. 537-549. ISSN 0360-5442

This list was generated on Sun Jun 13 13:15:39 2021 BST.