Items for Bin Mustaffa, Ahmad Fikri

Up a level
Export as [feed] RSS
Group by: Item Type | No Grouping
Number of items: 6.

Article

Bin Mustaffa, A F and Kanjirakkad, V (2021) Single and multiple circumferential casing groove for stall margin improvement in a transonic axial compressor. Journal of Turbomachinery, 143 (7). pp. 1-22. ISSN 0889-504X

Mustaffa, Ahmad Fikri and Kanjirakkad, Vasudevan (2021) Stall margin improvement in a low-speed axial compressor rotor using a blockage-optimised single circumferential casing groove. Journal of the Global Power and Propulsion Society, 5. pp. 79-89. ISSN 2515-3080

Mustaffa, Ahmad Fikri and Kanjirakkad, Vasudevan (2020) Casing-groove optimisation for stall margin in a transonic compressor rotor. International Journal of Numerical Methods for Heat and Fluid Flow. ISSN 0961-5539

Conference Proceedings

Mustaffa, A F and Kanjirakkad, V (2021) Single and multiple circumferential casing groove for stall margin improvement in a transonic axial compressor. ASME 2020 Turbo Expo, Virtual Conference, 21-25 September 2020. Published in: Proceedings of the ASME Turbo Expo 2020. 2A aGT2020-14974. ASME ISBN 9780791884065

Mustaffa, A F and Kanjirakkad, V (2020) Stall margin improvement in a low-speed axial compressor rotor using a blockage-optimised single circumferential casing groove. GPPS Chania20, Online conference, 7-9 September 2020. Published in: Proceedings of Global Power and Propulsion Society. 1-10. GPPS ISSN 2504-4400

Thesis

Bin Mustaffa, Ahmad Fikri (2020) Passive casing treatments for stall margin improvement in axial compressors. Doctoral thesis (PhD), University of Sussex.

This list was generated on Thu May 6 14:50:05 2021 BST.