Browse by Research Centres and Groups

Up a level
Export as [feed] RSS
Group by: Authors | Item Type | No Grouping
Jump to: A | B | C | D | G | H | J | K | L | M | O | P | R | S | T | W | X | Z
Number of items at this level: 85.

A

Abolghasemi, Mohammad Amin, Liang, Kun, Stone, Richard, Dadd, Mike and Bailey, Paul (2018) Stirling Pulse tube cryocooler using an active displacer. Cryogenics, 96. pp. 53-61. ISSN 0011-2275

Ahmadi Moghaddam, Hadi, Sarmadian, Alireza and Shafaee, Maziar (2019) An experimental study on condensation heat transfer characteristics of R-600a in tubes with coiled wire inserts. Applied Thermal Engineering. ISSN 1359-4311

Al Roqi, Abdurrhman A and Wang, Weiji (2014) Torque of rotating device prior an airlane landing. International Journal of Engineering Research and General Science, 2 (2). pp. 214-222. ISSN 2091-2730

Al-Manie, M A and Wang, W J (2015) A modified S-transform for EEG signals analysis. International Journal of Computational Methods, 12 (3). ISSN 0219-8762

Al-Mayyahi, Auday, Ali, Ramzy S and Thejel, Rabee' H (2017) Designing driving and control circuits of four-phase variable reluctance stepper motor using fuzzy logic control. Electrical Engineering (Archiv fur Elektrotechnik). pp. 1-15. ISSN 0948-7921

Aldair, Ammar A and Wang, Weiji (2010) FPGA based adaptive Neuro Fuzzy Inference controller for full vehicle nonlinear active suspension systems. International Journal of Artificial Intelligence and Applications, 1 (4). pp. 1-15. ISSN 0976-2191

Almazroui, Sultan and Wang, Weiji (2016) Microwave imaging for security applications. LAP Lambert Academic Publishing. ISBN 9783659852916

Alroqi, Abdurrhman and Wang, Weiji (2017) Investigation of the heat and wear of aircraft landing gear tyres. Lambert Academic Publishing. ISBN 9786202013260

Arjunan, Arun, Praveen, Ayyappan S, Olabi, Abdul G and Wang, Chang J (2019) Acoustic performance of metallic foams. In: Reference module in materials science and materials engineering. Elsevier, pp. 1-16. ISBN 9780128035818

Ascanio, G M and Wang, W J (2007) Diesel engine turbocharger performance monitoring using vibration analysis. The 8th International Conference on Engines for Automobile, Capri, Italy, 16-20 Sept 2007. Published in: Proceeding of the 8th International Conference on Engines for Automobile, ICE 2007.

B

Bennett, C, Dunne, J F, Trimby, S and Richardson, D (2017) Engine cylinder pressure reconstruction using crank kinematics and recurrently-trained neural networks. Mechanical Systems and Signal Processing, 85. pp. 126-145. ISSN 0888-3270

Boruah, Dibakor (2016) Analysis of dynamics of bladed discs with monocrystalline anisotropic blades. Masters thesis , University of Sussex.

C

Chen, Guoqiang and Dunne, J F (2016) A fast continuation scheme for accurate tracing of nonlinear oscillator frequency response functions. Journal of Sound and Vibration, 385. pp. 284-299. ISSN 0022-460X

Chen, Junjie, Zang, Chaoping, Zhou, Biao and Petrov, E P (2019) A study of friction microslip modelling for dynamic analysis of bladed discs with root joints. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 233 (8). pp. 2599-2614. ISSN 0954-4062

Cheng, Li, Dimitriou, Pavlos, Wang, William, Peng, Jun and Aitouche, Abdel (2018) A novel fuzzy logic variable geometry turbocharger and exhaust gas recirculation control scheme for optimizing the performance and emissions of a diesel engine. International Journal of Engine Research. ISSN 1468-0874

Chowdhury, J I, Soulatiantork, P and Nguyen, B K (2017) Simulation of waste heat recovery system with fuzzy based evaporator model. The 2017 Asian Control Conference - ASCC 2017, Gold Coast, Australia, 17-20 December 2017. Published in: 2017 11th Asian Control Conference (ASCC). 2143-2147. ISBN 9781509015733

Chowdhury, Jahedul Islam, Nguyen, Bao Kha, Thornhill, David, Hu, Yukun, Soulatiantork, Payam, Balta-Ozkan, Nazmiye and Varga, Liz (2018) Fuzzy nonlinear dynamic evaporator model in supercritical organic rankine cycle waste heat recovery systems. Energies, 11 (4). pp. 1-24. ISSN 1996-1073

D

Dizqah, Arash M, Maheri, Alireza and Busawon, Krishna (2014) An accurate method for the PV model identification based on a genetic algorithm and the interior-point method. Renewable Energy, 72. pp. 212-222. ISSN 0960-1481

Dizqah, Arash M, Maheri, Alireza, Busawon, Krishna and Fritzson, Peter (2015) Standalone DC microgrids as complementarity dynamical systems: modeling and applications. Control Engineering Practice, 35. pp. 102-112. ISSN 0967-0661

Dizqah, Arash M, Maheri, Alireza, Busawon, Krishna and Kamjoo, Azadeh (2015) A multivariable optimal energy management strategy for standalone DC microgrids. IEEE Transactions on Power Systems, 30 (5). pp. 2278-2287. ISSN 0885-8950

Dizqah, Arash Moradinegade, Lenzo, Basilio, Sorniotti, Aldo, Gruber, Patrick, Fallah, Saber and De Smet, Jasper (2016) A fast and parametric torque distribution strategy for four-wheel-drive energy-efficient electric vehicles. IEEE Transactions on Industrial Electronics, 63 (7). pp. 4367-4376. ISSN 0278-0046

Duan, Junlong and Wang, Weiji (2018) Electromagnetic coupling optimization by coil design improvements for contactless power transfer of electric vehicles. FTC 2018, Vancouver, Canada, 13-14 November 2018. Published in: Arai, Kohei, Bhatia, Rahul and Kapoor, Supriya, (eds.) Proceedings of the Future Technologies Conference (FTC) 2018. 2 944-958. Springer, Cham, Switzerland, Cham. ISSN 2194-5357 ISBN 9783030026820

G

Gao, Guijun, Wang, Changjiang and Kou, Ziming (2018) Experimental studies on the spraying pattern of a swirl nozzle for coal dust control. Applied Sciences, 8 (10). 1770 1-14. ISSN 2076-3417

Glovnea, Romeo and Zhang, Xingnan (2018) Elastohydrodynamic films under periodic load variation: an experimental and theoretical approach. Tribology Letters, 66 (116). pp. 1-11. ISSN 1023-8883

H

Hatziargyriou, Nikos, Yadusky, Will, Taylor, Jason, Bak-Jensen, Birgitte, Barlow, Mick, Joos, Geza, Rotheram, Angela, Schwaegerl, Christine, Lombardi, Pio, Venkataraman, Sundar, Cazzato, Fabio, Lu, Zhigang, Papadopoulos, Panagiotis, Skarvelis-Kazakos, Spyros, Cocchi, Luciano, Stamatiadis, Dionisis, Yoshinaga, Jun, Negnevitsky, Michael, Inkwan Hong, Ike, Pillai, Jayakrishnan Radhakrishna, Kleftakis, Vassilis and Baitch, Alex (2018) The impact of battery energy storage systems on distribution networks. Technical Report. CIGRE - International Council on Large Energy Systems.

J

Jafari, S, Dunne, J, Langari, M, Yang, Z, Pirault, J, Long, C and Thalackottore Jose, J (2018) Control of spray evaporative cooling in automotive IC engines. Journal of Thermal Science and Engineering Applications, 10 (4). pp. 1-11. ISSN 1948-5085

Jafari, Soheil, Dunne, Julian F, Langari, Mostafa, Yang, Zhiyin, Pirault, Jean-Pierre, Long, Chris A and Thalackottore Jose, Jisjoe (2017) A review of evaporative cooling system concepts for engine thermal management in motor vehicles. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 231 (8). pp. 1126-46. ISSN 0954-4070

Jiang, Hanying, Liang, Kun and Li, Zhaohua (2019) Characteristics of a novel moving magnet linear motor for linear compressor. Mechanical Systems and Signal Processing, 121. pp. 828-840. ISSN 0888-3270

K

Kamjoo, Azadeh, Maheri, Alireza, Dizqah, Arash M and Putrus, Ghanim A (2016) Multi-objective design under uncertainties of hybrid renewable energy system using NSGA-II and chance constrained programming. International Journal of Electrical Power and Energy Systems, 74. pp. 187-194. ISSN 0142‐0615

Kanarachos, Stratis, Dizqah, Arash Moradinegade, Chrysakis, Georgios and Fitzpatrick, Michael E (2018) Optimal design of a quadratic parameter varying vehicle suspension system using contrast-based fruit fly optimisation. Applied Soft Computing, 62. pp. 463-477. ISSN 1568‐4946

Kigezi, Tom Nsabwa and Dunne, Julian (2017) A model-based control design approach for linear free-piston engines. Journal of Dynamic Systems, Measurement and Control, 139 (11). ISSN 0022-0434

Koscso, Adam, Dhondt, Guido and Petrov, Yevgen (2018) High-fidelity sensitivity analysis of modal properties of mistuned bladed disks regarding material anisotropy. Journal of Engineering for Gas Turbines And Power, 141 (2). 021036 1-11. ISSN 0742-4795

L

Langari, M, Yang, Z, Dunne, J F, Jafari, S, Pirault, J-P, Long, C and Thalackottore Jose, J (2018) Conjugate heat transfer predictions for subcooled boiling flow in a horizontal channel using a volume-of-fluid framework. Journal of Heat Transfer, 140 (10). ISSN 0022-1481

Langari, M, Yang, Z, Dunne, J F, Jafari, S, Pirault, J-P, Long, C A and Thalackottore Jose, J T (2018) Multi-phase CFD-conjugate heat transfer for spray cooling in the non-boiling regime. Journal of Computational Multiphase Flows, 10 (1). pp. 33-42. ISSN 1757-482X

Lenzo, B, De Filippis, G, DIzqah, A M, Sorniotti, A, Gruber, P, Fallah, S and De Nijs, W (2017) Torque distribution strategies for energy-efficient electric vehicles with multiple drivetrains. Journal of Dynamic Systems, Measurement and Control, 139 (12). ISSN 0022-0434

Li, Jiangang, Liu, Ye, Li, Yanan and Zhong, Ganggang (2019) S-model speed planning of NURBS curve based on uniaxial performance limitation. IEEE Access, 7. pp. 60837-60849. ISSN 2169-3536

Li, Xinyu, Wang, Chang, Guo, Yuan and Chen, Weiyi (2017) An approach to developing customized total knee replacement implants. Journal of Healthcare Engineering, 2017 (92980). pp. 1-8. ISSN 2040-2295

Li, Y, Carboni, G, Gonzalez, F, Campolo, D and Burdet, E (2019) Differential game theory for versatile physical human-robot interaction. Nature Machine Intelligence, 1. pp. 36-43. ISSN 2522-5839

Li, Zhaohua and Liang, Kun (2018) Performance of an oil-free linear compressor using R1234yf. 1st IIR International Conference on the Application of HFO Refrigerants, Birmingham, 2nd-5th September 2018. Published in: Proceedings of 1st IIR International Conference on the Application of HFO Refrigerants. 1128 International Institute of Refrigeration ISSN 0151-1637 ISBN 9782362150272

Li, Zhaohua, Liang, Kun and Jiang, Hanying (2019) Experimental study of R1234yf as a drop-in replacement for R134a in an oil-free refrigeration system. Applied Thermal Engineering. ISSN 1359-4311

Liang, Ce, Wang, Chang Jiang, English, Martin and Mynors, Diane (2017) Optimization of the UltraSTEEL dimpling forming process for energy absorption. 12th International Conference on the Technology of Plasticity, ICTP 2017,, Cambridge, United Kingdom, 17-22 September 2017. Published in: Procedia Engineering. 207 1284-1289. Elsevier ISSN 1877-7058

Liang, Huixin, Xie, Deqiao, Mao, Yuyi, Shi, Jianping, Wang, Changjiang, Shen, Lida and Tian, Zongjun (2019) The size effect on forming quality of Ti–6Al–4V solid struts fabricated via laser powder bed fusion. Metals, 9 (4). 416 1-12. ISSN 2075-4701

Liang, Huixin, Yang, Youwen, Xie, Deqiao, Li, Lan, Mao, Ning, Wang, ChangJiang, Tian, Zongjun, Jiang, Qing and Shen, Lida (2019) Trabecular-like Ti-6Al-4V scaffolds for orthopedic: fabrication by selective laser melting and in vitro biocompatibility. Journal of Materials Science & Technology, 35 (7). pp. 1284-1297. ISSN 1005-0302

Liang, Kun (2018) Analysis of oil-free linear compressor operated at high pressure ratios for household refrigeration. Energy, 151. pp. 324-331. ISSN 0360-5442

Liang, Kun (2018) Numerical study of water effects on the laminar burning velocity of methanol. Biomass and Bioenergy, 108. pp. 307-311. ISSN 0961-9534

Liang, Kun (2017) A review of linear compressors for refrigeration. International Journal of Refrigeration, 84. pp. 253-273. ISSN 0140-7007

Liang, Kun, Li, Zhaohua, Chen, Ming and Jiang, Hanying (2019) Comparisons between heat pipe, thermoelectric system, and vapour compression refrigeration system for electronics cooling. Applied Thermal Engineering, 146. pp. 260-267. ISSN 1359-4311

Liang, Kun and Stone, Richard (2017) Laminar burning velocity measurement of hydrous methanol at elevated temperatures and pressures. Fuel, 204. pp. 206-213. ISSN 0016-2361

Liang, Kun, Stone, Richard, Dadd, Mike and Bailey, Paul (2016) The effect of clearance control on the performance of an oil-free linear refrigeration compressor and a comparison between using a bleed flow and a DC current bias. International Journal of Refrigeration, 69. pp. 407-417. ISSN 0140-7007

Liu, Zibo, Liang, Huixin, Shi, Tianshu, Xie, Deqiao, Chen, Ruoyu, Han, Xiao, Shen, Lida, Wang, Changjiang and Tian, Zongjun (2019) Additive manufacturing of hydroxyapatite bone scaffolds via digital light processing and in vitro compatibility. Ceramics International, 45 (8). pp. 11079-11086. ISSN 0272-8842

Lv, Fei, Shen, Lida, Liang, Huixin, Xie, Deqiao, Wang, Changjiang and Tian, Zongjun (2019) Mechanical properties of AlSi10Mg alloy fabricated by laser melting deposition and improvements via heat treatment. Optik, 179. pp. 8-18. ISSN 0030-4026

M

Mashouf, H, Shafaee, M, Sarmadian, A and Mohseni, S G (2017) Visual study of flow patterns during evaporation and condensation of R-600a inside horizontal smooth and helically dimpled tubes. Applied Thermal Engineering, 124. pp. 1392-1400. ISSN 1359-4311

Meng, Zhongwei, Liang, Kun and Fang, Jia (2019) Laminar burning velocities of iso-octane, toluene, 1-hexene, ethanol and their quaternary blends at elevated temperatures and pressures. Fuel, 237. pp. 630-636. ISSN 0016-2361

Mohammed, A Al-Miane and Wang, William J (2013) Inverse Gabor transform for speech enhancement. Acoustics Australia, 41 (3). pp. 225-230. ISSN 0814-6039

O

Otsu, Takefumi, Glovnea, Romeo and Joichi, Sugimura (2018) Cavitation growth phenomena in pure-sliding grease EHD contacts. Lubricants, 6 (3). ISSN 2075-4442

P

Petrov, E P (2017) Frequency-domain sensitivity analysis of stability of nonlinear vibrations for high-fidelity models of jointed structures. Proceedings of ASME Turbo Expo 2017: Turbomachinery Technical Conference and Exposition, Charlotte, USA, 26-30 June 2017. Published in: Journal of Engineering for Gas Turbines and Power. American Society of Mechanical Engineers ISSN 0742-4795 ISBN 9780791850930

Petrov, E P (2018) A method for parametric analysis of stability boundaries for nonlinear periodic vibrations of structures with contact interfaces. Journal of Engineering for Gas Turbines and Power, 141 (3). 031023 1-11. ISSN 0742-4795

R

Rajasekharan Nair, Rahul and Petrov, Yevgen (2018) Analysis of deformation of mistuned bladed disks with friction and random crystal anisotropy orientation using gradient-based polynomial chaos expansion. ASME Turbo Expo 2018: Turbomachinery Technical Conference and Exposition: Volume 7C: Structures and Dynamics.

S

Saner, Can Berk and Skarvelis-Kazakos, Spyros (2018) Fuel savings in remote Antarctic microgrids through energy management. 53rd International Universities Power Engineering Conference, Glasgow, UK, 4th-7th September 2018. Published in: 2018 53nd International Universities Power Engineering Conference (UPEC). 1-6. Institute of Electrical and Electronics Engineers ISBN 9781538629116

Sarmadian, A, Shafaee, M, Mashouf, H and Mohseni, S G (2017) Condensation heat transfer and pressure drop characteristics of R-600a in horizontal smooth and helically dimpled tubes. Experimental Thermal and Fluid Science, 86. pp. 54-62. ISSN 0894-1777

Shafaee, M, Mashouf, H, Sarmadian, A and Mohseni, S G (2016) Evaporation heat transfer and pressure drop characteristics of R-600a in horizontal smooth and helically dimpled tubes. Applied Thermal Engineering, 107. pp. 28-36. ISSN 1359-4311

Shi, D F, Wang, W J and Qu, L S (2004) Defects detection for bearings: using envelope spectra of wavelet transforms. Journal of Vibration And Acoustics, 126 (1). pp. 567-573. ISSN 1048-9002

Shi, D F, Wang, W J, Unsworth, P J and Qu, L S (2004) Purification and feature extration of shaft orbits for diagnosing large rotating machinery. Journal of Sound and Vibration, 279 (3-5). pp. 581-600. ISSN 0022-460X

Skarvelis-Kazakos, Spyros (2018) Automating virtual power plant decision making with fuzzy logic and human psychology. 53rd International Universities Power Engineering Conference, Glasgow, UK, 4th-7th September 2018. Published in: 2018 53nd International Universities Power Engineering Conference (UPEC). Institute of Electrical and Electronics Engineers ISBN 9781538629109

T

Tan, Yuanqiu, Zang, Chaoping and Petrov, E P (2019) Analysis of sensitivity and optimization for mistuned bladed disk forced response using high-fidelity models. Mechanical Systems and Signal Processing, 124 (1). pp. 502-523. ISSN 0888-3270

Thomas, Evan, Pascovici, Mircea D and Glovnea, Romeo P (2015) Load carrying capacity of a heterogeneous surface bearing. Friction, 3 (4). pp. 287-293. ISSN 2223-7704

Tian, Liang and Wang, Weiji (2013) Nonlinear dynamics of rotor bearing systems in automotive turbochargers. LAP Lambert Academic Publishing. ISBN 9783659332913

W

Wang, C, Chen, W, Guo, Y, Yue, B and Zeng, Y (2018) Biomechanics of knee joint. In: Zhang, X and Tang, T (eds.) Biomechanics of bone and joints (in Chinese). Shanghai Jiaotong University, Shanghai, pp. 215-237. ISBN 978-7-313-18500-6

Wang, Chang Jiang and Hazlehurst, Kevin B (2019) Orthopaedic implant design and analysis: potential of 3D/4D bioprinting. In: Maniruzzaman, Mohammed (ed.) 3D and 4D printing in biomedical applications: process engineering and additive manufacturing. Wiley-VCH, pp. 423-442. ISBN 9783527344437

Wang, Guanjun, Shen, Lida, Zhao, Jianfeng, Liang, Huixin, Xie, Deqiao, Tiang, Zongjun and Wang, Changjiang (2018) Design and compressive behavior of controllable irregular porous scaffolds: based on Veronoi-tessellation and for additive manufacturing. ACS Biomaterials Science and Engineering, 4 (2). pp. 719-727. ISSN 2373-9878

Wang, W J (2016) Dynamics and energy conversion of aircraft landing gears at touchdown. 3rd International Conference on Mechanics and Mechatronics Research (ICMMR 2016), Chongqing, China, 15-17 June 2016. Published in: MATEC Web of Conferences. 77 (01038) EDP Sciences ISSN 2261-236X

Wang, Weiji (2014) Tyre noise reduction using damping layers. Lecture Note Series on Computational and Systems Engineering (LCSE). pp. 27-33.

Wang, Weiji (2018) Undercarriage heat power in aircraft landing. Aeronautics and Aerospace Open Access Journal, 2 (4). pp. 215-221. ISSN 2576-4500

Wang, Weiji (2017) Wheel dynamic response to rolling excitation on road. Second International Conference on Mechanics, Materials and Structural Engineering (ICMMSE 2017), Beijing, China, 14-16 April 2017. Published in: Wang, Weiji, (ed.) Advances in Engineering Research. 102 208-213. Atlantis Press ISSN 2352-5401 ISBN 9789462523708

Wang, Weiji and Aldair, A Aldair (2012) Smart controllers for full vehicle nonlinear active suspension systems. Lambert Academic Publishing. ISBN 9783659248306

Wang, Xiao, Xu, Mingyang, Wang, Zhanwen, Shen, Lida, Qiu, Mingbo, Tian, Zongjun, Ahsan, Muhammad Naveed and Wang, Changjiang (2019) Properties of jet-plated Ni coating on Ti alloy (Ti6Al4V) with laser cleaning pretreatment. Metals, 9 (2). 248 1-12. ISSN 2075-4701

X

Xie, Deqiao, Zhao, Jianfeng, Liang, Huixin, Liu, Shuang, Tian, Zongjun, Shen, Lida and Wang, Changjiang (2018) Cause of angular distortion in fusion welding: asymmetric cross-sectional profile along thickness. Materials, 12 (1). 58 1-14. ISSN 1996-1944

Xie, Deqiao, Zhao, Jianfeng, Liang, Huixin, Tian, Zongjun, Shen, Lida, Xiao, Meng, Ahsan, Muhammad Naveen and Wang, Changjiang (2018) Assumption of constraining force to explain distortion in laser additive manufacturing. Materials, 11 (11). p. 2327. ISSN 1996-1944

Z

Zang, Chaoping, Tan, Yuanqiu and Petrov, E P (2017) Analysis of forced response for bladed discs mistuned by material anisotropy orientation scatters. Journal of Engineering for Gas Turbines and Power, 140 (2). ISSN 0742-4795

Zhang, X and Glovnea, R P (2017) The behaviour of lubricated EHD contacts subjected to vibrations. IOP Conference Series: Materials Science and Engineering, 174 (1). a012036. ISSN 1757-8981

Zhang, Xingnan, Glovnea, Romeo and Sugimura, Joichi (2017) The effect of lubricant supply and frequency upon the behaviour of EHD films subjected to vibrations. IOP Conference Series: Materials Science and Engineering, 174 (1). 012033. ISSN 1757-8981

Zheng, G T and Wang, W J (2001) A new cepstral analysis procedure of recovering excitations for recovering excitations for transient components of vibration signals and applications to rotating machinery Condition Monitoring. Journal of Vibration And Acoustics, 123 (2). pp. 222-229. ISSN 1048-9002

Zhu, Yiyun, Fan, Xiaona, Wang, Changjiang and Sang, Guochen (2018) Analysis of heat transfer and thermal environment in a rural residential building for addressing energy poverty. Applied Sciences, 8 (11). 2077 1 -13. ISSN 2076-3417

Zhu, Yiyun, Wang, Chang Jiang and Mynors, Diane (2016) Applications and engineering analysis of lotus roots under external water pressure. Applied Bionics and Biomechanics, 2016. p. 2386982. ISSN 1176-2322

Zhu, Zhennan, Liang, Kun, Zeng, Dongjian, Meng, Zhongwei, Zuo, Zinong and Pei, Yiqiang (2019) Laminar flame characteristics of natural gas and dissociated methanol mixtures diluted by nitrogen. Journal of the Energy Institute. ISSN 1743-9671

This list was generated on Wed Jul 17 07:52:55 2019 BST.