Browse by Journal

Up a level
Export as [feed] RSS
Group by: Item Type | No Grouping
Jump to: Article
Number of items: 18.

Article

Aslanidou, Ioanna, Rosic, Budimir, Kanjirakkad, Vasudevan and Uchida, Sumiu (2013) Leading edge shielding concept in gas turbines with can combustors. Journal of Turbomachinery, 135 (2). 021019-021027. ISSN 0889-504X

Petrov, E P (2012) Analysis of flutter-induced limit cycle oscillations in gas-turbine structures with friction, gap, and other nonlinear contact interfaces. Journal of Turbomachinery, 134 (6). 061018/1-061018/13. ISSN 0889-504X

Tucker, Paul, Eastwood, Simon, Klostermeier, Christian, Xia, Hao, Ray, Prasun, Tyacke, James and Dawes, William (2012) Hybrid LES approach for practical turbomachinery flows - part 2: further applications. Journal of Turbomachinery, 134 (2). 021024. ISSN 0889-504X

Kanjirakkad, Vasudevan, Thomas, Richard, Hodson, Howard, Janke, Erik, Haselbach, Frank and Whitney, Chris (2008) Passive shroud cooling concepts for HP turbines: experimental investigations. Journal of Turbomachinery, 130 (1). 011017. ISSN 0889-504X

Nikolic, M, Petrov, E P and Ewins, D J (2007) Coriolis forces in forced response analysis of mistuned bladed disks. Journal of Turbomachinery, 129 (4). pp. 730-739. ISSN 0889-504X

Petrov, E P (2007) Direct parametric analysis of resonance regimes for nonlinear vibrations of bladed disks. Journal of Turbomachinery, 129 (3). pp. 495-502. ISSN 0889-504X

Petrov, E P and Ewins, D J (2007) Advanced modeling of underplatform friction dampers for analysis of bladed disk vibration. Journal of Turbomachinery, 129 (1). pp. 143-150. ISSN 0889-504X

Petrov, E P and Ewins, D J (2006) Effects of damping and varying. contact area at blade-disk joints in forced response analysis of bladed disk assemblies. Journal of Turbomachinery, 128 (2). pp. 403-410. ISSN 0889-504X

Vahdati, M, Sayma, A I, Freeman, C and Imregun, M (2005) On the use of atmospheric boundary conditions for axial-flow compressor stall simulations. Journal of Turbomachinery, 127 (2). pp. 349-351. ISSN 0889-504X

Petrov, E P and Ewins, D J (2005) Method for analysis of nonlinear multiharmonic vibrations of mistuned bladed disks with scatter of contact interface characteristics. Journal of Turbomachinery, 127 (1). pp. 128-136. ISSN 0889-504X

Petrov, E P (2004) Method for direct parametric analysis of nonlinear forced response of bladed disks with friction contact interfaces. Journal of Turbomachinery, 126 (4). pp. 654-662. ISSN 0889-504X

Petrov, E P and Ewins, D J (2004) Generic friction models for time-domain vibration analysis of bladed disks. Journal of Turbomachinery, 126 (1). pp. 184-192. ISSN 0889-504X

Petrov, E P (2004) A method for use of cyclic symmetry properties on analysis of nonlinear multiharmonic vibrations of bladed disks. Journal of Turbomachinery, 126 (1). pp. 175-183. ISSN 0889-504X

Petrov, E P and Ewins, D J (2003) Analysis of the worst mistuning patterns in bladed disk assemblies. Journal of Turbomachinery, 125 (4). pp. 623-631. ISSN 0889-504X

Petrov, E P and Ewins, D J (2003) Analytical formulation of friction interface elements for analysis of nonlinear multi-harmonic vibrations of bladed disks. Journal of Turbomachinery, 125 (2). pp. 364-371. ISSN 0889-504X

Long, Christopher A, Turner, Alan B, Kais, Guven, Tham, Kok M and Verdicchio, John A (2003) Measurement and CFD Prediction of the Flow within an H P Compressor Drive Cone. Journal of Turbomachinery, 125 (1). pp. 165-172. ISSN 0889-504X

Childs, P R N and Noronha, M B (1999) The Impact of Machining Techniques on Centrifugal Compressor Impeller Performance. Journal of Turbomachinery, 121. pp. 637-643. ISSN 0889-504X

Long, C A, Morse, A P and Tucker, P G (1997) Measurement and Computation of Heat Transfer in High Pressure Compressor Drum Geometries with Axial Throughflow. Journal of Turbomachinery, 119 (1). pp. 51-60. ISSN 0889-504X

This list was generated on Mon Aug 21 15:08:20 2017 BST.