Items for Childs, Peter Robin Nicholas

Up a level
Export as [feed] RSS
Group by: Item Type | No Grouping
Number of items: 54.

Article

Coren, D, Childs, P R N and Long, C A (2009) Windage sources in smooth-walled rotating disc systems. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 223 (4). pp. 873-888. ISSN 0954-4062

Cooke, A, Childs, P, Sayma, N and Long, C A (2009) A disc to air heat flux error and uncertainty analysis applied to a turbomachinery test rig design. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 223 (3). pp. 659-674. ISSN 0954-4062

Long, C A, Miche, N D D and Childs, P R N (2007) Flow Measurements inside a Heated Multiple Rotating Cavity with Axial Throughflow. International Journal of Heat and Fluid Flow, 28 (6). pp. 1391-1404. ISSN 0142-727X

Childs, P R N and Long, C A (2007) Shroud Heat Transfer Measurements Inside a Heated Multiple Rotating Cavity with Axial Throughflow. International Journal of Heat and Fluid Flow, 28 (6). pp. 1405-1417. ISSN 0142-727X

Peng, Z, New, P, Long, C A and Childs, P R N (2007) The Operating Characteristics of a High Radius Pre-swirl Cooling System. Journal of Aerospace Power, 22 (6). pp. 849-858. ISSN 1000-8055

Childs, Peter and Long, Christopher (2007) The effect of inlet conditions on the flow and heat transfer in a multiple rotating cavity with axial throughflow. Journal of Aerospace Power, 22 (5). pp. 683-693. ISSN 1000-8055

Morris, Richard, Childs, Peter and Hamilton, Tom (2007) Sustainability by Design: A reflection on the suitability of pedagogic practice in design and engineering courses to the teaching of sustainable design. European Journal of Engineering Education, 32 (2). pp. 135-142. ISSN 0304-3797

Long, C A, Childs, P R N, Greenwood, J R and Tham, K M (2004) Manufacture and calibration of robust heat flux sensors for rotating turbomachinery. Experimental Heat Transfer, 17 (3). pp. 181-197. ISSN 0891-6152

Long, C A, Childs, P R N, Greenwood, J R and Tham, K M (2004) Manufacture and Calibration of Rubust Heat Flux Sensors for Rotating Turbomachinery. International Journal of Experimental Heat Transfer, 17 (3). pp. 181-197. ISSN 0891-6152

Cooke, Adam and Childs, Peter (2004) Optical Fiber IR Thermometry and its use within Gas Turbines. IASME Transactions, 1 (3). pp. 551-559. ISSN 1790-031X

Childs, Peter and Turner, Alan (2002) The effect of labyrinth seal clearance on stator-well flow and windage heating. International Journal of Turbo and Jet Engines, 19 (4). pp. 219-232. ISSN 0334-0082

Turner, A B, Davies, S J, Childs, P R N, Harvey, C G and Millward, J A (2000) Development of a novel gas turbine driven centrifugal compressor. Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 214 (5). pp. 423-437. ISSN 0957-6509

Childs, P R N, Greenwood, J R and Long, C A (2000) Review of Temperature Measurement. Review of Scientific Instruments, 71. pp. 2959-2978. ISSN 0034-6748

Ozturk, H K, Turner, A B, Childs, P R N and Bayley, F J (2000) Stator-well Flows in Axial Compressors. International Journal of Heat and Fluid Flow, 21 No.. pp. 710-716. ISSN 0142-727X

Childs, P R N, Greenwood, J R and Long, C A (1999) Heat Flux Measurement Techniques. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 213 (7). pp. 655-677. ISSN 0954-4062

Childs, P R N and Noronha, M B (1999) The Impact of Machining Techniques on Centrifugal Compressor Impeller Performance. Journal of Turbomachinery, 121. pp. 637-643. ISSN 0889-504X

Childs, P R N and Long, C A (1996) A Review of Forced Convective Heat Transfer in Stationary and Rotating Annuli. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 210 (2). pp. 123-134. ISSN 0954-4062

Book Section

Childs, Peter R N (2003) Advances in temperature measurement. In: Hartnett, James P, Irvine, Thomas F, Cho, Young I and Greene, George A (eds.) Advances in Heat Transfer. Advances in Heat Transfer, 36 . Academic Press, San Diego and London, pp. 111-181. ISBN 9780120200368

Reports and working papers

Childs, Peter (2007) Flow in rotating components - discs, cylinders and cavities. Discussion Paper. IHS Global, Denver.

Childs, Peter, Pett, Alexander and Childs, Peter (2005) T500 and T1000 HP Compressor Rear Cone Read Across Study DNS112860. Project Report. Rolls-Royce UTC in Aero Thermal Systems.

Conference or Workshop Item

Hamilton, Tom, Morris, Richard and Childs, Peter (2007) Learning from higher arts education in designing constructivist learning spaces. In: Unset, Brighton.

Peng, Z, New, P, Long, C A and Childs, P R N (2007) An experimental investigation of a high radius pre-swirl cooling system. In: 8th International Symposium on Experimental and Computational Aerothermodynamics of Internal Flows, Lyon.

Farahani, Arash and Childs, Peter (2007) Characterisation of Static Strip Seal Flow. In: ASME Turbo Expo 2007: Power for Land, Sea and Air, Montreal, Canada.

Pett, Alexander D W, Coren, Daniel D and Childs, Peter R N (2007) Model Validation for a Shrouded Rotor-Stator System with a Superposed Cooling and Static Protuberances. In: Unset, Montreal, Canada.

Georgakis, C, Whitney, C, Woollatt, G, Stefanis, V and Childs, P (2007) Turbine stator well CFD studies: effect of upstream egress ingestion. In: Unset, Montreal, Canada.

Cooke, Adam, Childs, Peter and Long, Christopher (2007) Investigation Into the Effect of Uncertainty in Thermal Properties on Turbomachinery Disc Heat Transfer Using Both a Monte Carlo Simulation Technique and a Taylor Series Uncertainty Propagation Method. In: ASME Turbo Expo 2007: Power for Land, Sea and Air, Montreal, Canada.

Childs, Peter, Cooke, Adam and Long, Christopher (2007) Evaluation of the effect of uncertainty in material properties on turbomachinery disc heat transfer using Monte Carlo simulation methods. In: ASME Turbo Expo 2007: Power for Land, Sea and Air., Montreal, Canada.

Childs, P R N, Hamilton, T, Morris, R D and Johnston, G (2006) CENTRE FOR TECHNOLOGY ENABLED CREATIVITY. In: Educating designers for a global context? : proceedings of the 4th Engineering & Product Design Education International Conference, Salzburg, Austria, 7-8 September, 2006, SALZBURG UNIVERSITY OF APPLIED SCIENCES, SALZBURG, AUSTRIA.

Peng, Z, New, P, Long, C A and Childs, P R N (2006) Operating characteristics of a high radius pre-swirl cooling system. In: International symposium on jet propulsion and power engineering, Kunming, China.

Childs, Peter, Dullenkopf, Klaus and Bohn, Dieter (2006) Internal air systems experimental rig best practice. In: ASME Turbo Expo 2006: Power for Land, Sea and Air, 8-11th May, 2006, Barcelona, Spain.

Cooke, A, Childs, P and Long, C (2006) An investigation into the uncertainty of turbomachinery disc heat transfer obtained via inverse analysis of temperature measurements. In: ASME Turbo Expo 2006, Barcelona, Spain.

Childs, Peter and Pizarro de la Fuente, Carlos (2006) An Investigation of Lock Plate Flow. In: ASME Gas Turbine and AeroEngine Technical Congress and Exposition, Barcelona, Spain.

Farahani, Arash and Childs, Peter (2006) Nozzle guide vane static strip seals. In: ASME Turbo Expo 2006: Power for Land, Sea, and Air, 8-11th May, 2006, Barcelona, Spain.

Dixon, Jeffrey A, Brunton, Ivan L, Scanlon, Timothy J, Wojciechowski, Grzegorz, Stefanis, Vassilis and Childs, P R N (2006) Turbine stator well heat transfer and cooling flow optimisation. In: Unset.

Childs, Peter R N (2006) Gas turbine engine internal air systems. In: 1st International Symposium on Jet Propulsion and Power Engineering, September, Kunming, China.

Robinson, L A, Childs, P R N and Stobart, R K (2004) Escaping the straitjacket of engineering education. In: 2nd International Engineering and Product Design Education Conference EPDE04, 2004.

Morris, R D, Thomas, A L and Childs, P R N (2003) Cabin and passenger environment design for the Airbus A380. In: International engineering and product design conference; Ethics in engineering design.

Childs, Peter, Thomas, Adrian and Morris, R (2003) Cabin and passenger environment design for the Airbus 380 ¿ a case study for education. In: Ethics in Engineering Design.

Tham, Kok M, Long, Christopher A, Turner, Alan B, Childs, Peter and Dixon, JA (2003) Computation of the Flow in a H P Compressor Drive Cone Cavity. In: IGTC Conference, Tokyo.

Smout, Peter D, Chew, John W and Childs, Peter R N (2002) A European collaborative research program on internal cooling systems for gas turbines. In: ASME Turbo Expo, Amsterdam, The Netherlands.

Atkins, R D, Ping, R Kennedy and Childs, P R N (2002) Idea transfer and company constraints in the design of a two-seater sports car. In: Total vehicle technology; Proceedings of the 2nd IMechE Automobile Division Southern Centre Conference on total vehicle technology, how do we get the innovation back into vehicle designn, Brighton.

Childs, Peter (2002) Exploring creativity from the start. In: 24th SEED Annual Conference and 8th National Conference on Product Design Education.

Childs, Peter and Stobart, Richard (2002) Getting the Innovation back into design. In: 2nd ADSC, IMechE Conference on Total Vehicle Technology.

Milburn, C and Childs, P R N (2001) The Styling Process. In: Total Vehicle Technology.

Childs, P R N, Downie, J H and Katz, T (2001) Design models and their value in education. In: 23rd SEED Annual Design Conference and 8th National Conference on Product Design Education.

Scott, R M, Childs, P R N, Hills, N J and Millward, J A (2000) Radial Inflow into the Downstream Cavity of a Compressor Stator Well. In: Unset, ASME Gas Turbine Conference 2000 (paper no. 2000-GT-0507).

Book

Childs, Peter (2007) Temperature measurement: resistance thermometry. IHS ESDU, London. ISBN 9781862465954

Childs, Peter (2007) Temperature Measurement: Thermocouples. Engineering Sciences Data Unit, London. ISBN 9781862465947

Childs, Peter R N (2003) Mechanical Design. Butterworth Heinemann, London. ISBN 9780750657716

Childs, Peter (2002) Temperature measurement: techniques. IHS ESDU, London. ISBN 9781862461963

Childs, Peter R N (2001) Practical Temperature Measurement. Butterworth Heinemann, Amsterdam. ISBN 9780750650809

Edited Book

Childs, Peter R N and Stobart, Richard K, eds. (2004) Proceedings of the 3rd IMechE Automobile Division Southern Centre Conference on: Total Vehicle Technology - Finding the Radical, Implementing the Practical. IMechE Event Publications, 10 . Professional Engineering Press, Bury St. Edmunds and London. ISBN 9781860584602

Stobart, Richard and Childs, Peter R N, eds. (2002) Total Vehicle Technology: How Do We Get the Innovation Back into Vehicle Design? Wiley-Blackwell, Oxford. ISBN 9781860583773

Childs, Peter R N and Stobart, Richard K, eds. (2001) Total Vehicle Technology: Challenging Current Thinking. Wiley-Blackwell, Chichester. ISBN 9781860583247

This list was generated on Sat Nov 25 05:19:27 2017 GMT.