Items for Peng, Jun

Up a level
Export as [feed] RSS
Group by: Item Type | No Grouping
Number of items: 30.

Article

Boulkroune, Boulaïd, Aitouche, Abdel, Cocquempot, Vincent, Cheng, Li and Peng, Jun (2015) Actuator Fault Diagnosis with Application to a Diesel Engine Testbed. Mathematical Problems in Engineering, 2015. p. 189860. ISSN 1024-123X

Dimitriou, Pavlos, Wang, William, Peng, Jun, Cheng, Li, Wellers, Matthias and Gao, Bo (2014) Analysis of diesel engine in-cylinder air-fuel mixing with homogeneity factor: combined effects of pilot injection strategies and air motion. SAE International Journal of Engines, 7 (4). pp. 2045-2060. ISSN 1946-3944

Tian, L, Wang, W J and Peng, Z J (2013) Nonlinear effects of unbalance in the rotor-floating ring bearing system of turbochargers. Mechanical Systems and Signal Processing, 34 (1-2). pp. 298-320. ISSN 0888-3270

Tian, Liang, Wang, William and Peng, Jun (2012) Effects of bearing outer clearance on the dynamic behaviours of the full floating ring bearing supported turbocharger rotor. Mechanical Systems and Signal Processing, 31 (1). pp. 155-175. ISSN 0888-3270

Mobashen, Raouf, Peng, Zhijun and Mirsalim, Seyed Mostafa (2012) Analysis the effect of advanced injection strategies on engine performance and pollutant emissions in a heavy duty DI-diesel engine by CFD modeling. International Journal of Heat and Fluid Flow, 33 (1). pp. 59-69. ISSN 0142-727X

Tian, Liang, Wang, William and Peng, Jun (2011) Dynamic behaviours of a full floating ring bearing supported turbocharger rotor with engine excitation. Journal of Sound and Vibration, 330 (20). pp. 4851-4874. ISSN 0022-460X

Wang, T-Y, Peng, Z-J and Wang, G-D (2011) In-cylinder air motion characteristics with variable valve lift in a spark ignition engine. Part 1: swirl flow. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 225 (4). pp. 479-497. ISSN 0954-4070

Peng, Zhijun, Liu, Bin, Wang, Weiji and Lu, Lipeng (2011) CFD investigation into diesel PCCI combustion with optimized fuel injection. Energies, 4 (3). pp. 517-531. ISSN 1996-1073

Jia, Ming, Xie, Maozhao and Peng, Zhijun (2010) Applying the multi-zone model in predicting the operating range of HCCI engines. Frontiers of Energy and Power Engineering in China, 4 (3). pp. 414-423. ISSN 1673-7393

Peng, Zhijun (2009) Numerical simulation of charge stratifications to improve combustion and NO formation of lean-burn SI engines. Frontiers of Energy and Power Engineering in China, 3 (3). pp. 353-358. ISSN 1673-7393

Peng, Zhijun, Jia, Ming and Lu, Lipeng (2009) CFD Analysis of VVT/VVA on the Gas Exchange and Fuel-Air Mixing in a Diesel Engine. SAE International Journal of Fuels and Lubricants, 1 (1). pp. 1026-1036. ISSN 1946-3952

Jia, Ming, Peng, Zhijun, Xie, Maozhao and Stobart, Richard (2009) Evaluation of Spray/Wall Interaction Models under the Conditions Related to Diesel HCCI Engines. SAE International Journal of Fuels and Lubricants, 1 (1). pp. 993-1008. ISSN 1946-3952

Peng, Zhijun and Jia, Ming (2009) Full Engine Cycle CFD Investigation of Effects of Variable Intake Valve Closing on Diesel PCCI Combustion and Emissions. Energy and Fuels, 23 (12). pp. 5855-5864. ISSN 0887-0624

Jia, M, Peng, Z-J and Xie, M-Z (2009) Numerical investigation of soot reduction potentials with diesel homogeneous charge compression ignition combustion by an improved phenomenological soot model. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 223 (3). ISSN 0954-4070

Peng, Zhijun (2009) Numerical simulation of charge stratifications to improve combustion and NO formation of lean burn SI engines. Frontiers of Energy and Power Engineering in China, 3 (3). pp. 353-358. ISSN 1673-7393

Peng, Z J and Jia, M (2008) An investigation and evaluation of variable-valve-timing and variable-valve-actuation strategies in a diesel homogeneous charge compression ignition engine using three-dimensional computational fluid dynamics. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 222 (6). pp. 1047-1064. ISSN 0954-4070

Wang, T, Peng, Z, Liu, S-L and Zhao, H (2007) Optimization of Stratification Combustion in a SI Engine by Double Pulse Port Fuel Injection. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 221 (7). pp. 845-857. ISSN 0954-4070

Peng, Z, New, P, Long, C A and Childs, P R N (2007) The Operating Characteristics of a High Radius Pre-swirl Cooling System. Journal of Aerospace Power, 22 (6). pp. 849-858. ISSN 1000-8055

Peng, Zhijun, Zhao, Hua, Ma, Tom and Ladommatos, Nicos (2005) Characteristics of Homogeneous Charge Compression Ignition (HCCI) Combusion and Emissions of n-heptance. Combustion Science and Technology, 177 (11). pp. 2113-2150. ISSN 0010-2202

Zhao, H, Xie, H and Peng, Jun (2005) Effect of recycled burned gases on homogeneous charge compression ignition combustion. Combustion Science and Technology, 177 (10). pp. 1863-1882. ISSN 0010-2202

Peng, Z, Zhao, H and Ladommatos, N (2003) Visualization of the homogeneous charge compression ignition/controlled autoignition combustion process using two-dimensional planar laser-induced fluorescence imaging of formaldehyde. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 217 (12). pp. 1125-1134. ISSN 0954-4070

Li, Y, Zhao, H, Peng, Z and Ladommatos, N (2002) Particle Image Velocimetry Measurement of In-Cylinder Flow in internal Combustion Engines - Experiment and Flow Structure Analysis. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 216 (1). pp. 65-81. ISSN 0954-4070

Li, Y, Zhao, H, Peng, Z and Ladosmmatos, N (2002) Tumbling Flow Analysis in a Four-Valve Spark Ignition Engine Using Particle Image Velocimetry. International Journal of Engine Research, 3 (3). pp. 139-156. ISSN 1468-0874

Zhao, H, Peng, Z and Ladommatos, N (2001) Understanding of Controlled Autoignition Combustion in a Four-Stroke Gasoline Engine. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 215 (12). pp. 1297-1310. ISSN 0954-4070

Xu, Zhen-zhong, Peng, Zhi-Jun, Gong, Yun-yi and Liu, Shu-liang (2001) LDA Measurement of Droplet Velocities in a High Injection Pressure Diesel Fuel Spray. Transaction of CSICE, 19 (4). pp. 349-355. ISSN 1000-0909

Conference or Workshop Item

Cheng, Li, Wang, William, Aitouche, Abdel and Peng, Zhijun (2015) Robustness evaluation of real-time fuzzy logic control of the VGT and EGR on a diesel engine. In: Control and Automation (MED), 2015 23th Mediterranean Conference on, 16-19 June 2015, Torremolinos (Malaga), Spain.

Cheng, Li, Peng, Zhijun, Wang, Weiji and Aitouche, Abdel (2015) Simulation investigation of the performance and cost of pure electric vehicle power train with Ultracapacitor. In: 4th International Conference on Systems and Control (ICSC), 28-30 April 2015, Sousse, Tunisia.

Liu, Wei, Peng, Zhijun and Zhang, Jing (2009) An evaluation system for service quality of brand specialty shops. In: 2009 IEEE 16th International Conference on Industrial Engineering and Engineering Management, IE and EM 2009; 21 October 2009 through 23 October 2009, Beijing, China.

Peng, Z, New, P, Long, C A and Childs, P R N (2007) An experimental investigation of a high radius pre-swirl cooling system. In: 8th International Symposium on Experimental and Computational Aerothermodynamics of Internal Flows, Lyon.

Peng, Z, New, P, Long, C A and Childs, P R N (2006) Operating characteristics of a high radius pre-swirl cooling system. In: International symposium on jet propulsion and power engineering, Kunming, China.

This list was generated on Sat Mar 25 02:32:01 2017 GMT.