Items for Long, Christopher

Up a level
Export as [feed] RSS
Group by: Item Type | No Grouping
Number of items: 35.

Article

Sayma, Naser, Roshani Moghaddam, Elham and Long, Christopher (2013) A NUMERICAL INVESTIGATION OF MOMENT COEFFICIENT AND FLOW STRUCTURE IN A ROTOR-STATOR CAVITY WITH ROTOR MOUNTED BOLTS. Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 227 (3). pp. 306-327. ISSN 2041-2967

Eastwood, D, Childs, P R N, Scanlon, T J, Guijarro-Valencia, D D, Coren, D D, Long, C A and Atkins, N R (2012) Experimental investigation of turbine stator well rim seal, reingestion and interstage seal flows using gas concentration techniques and displacement measurements. Journal of Engineering for Gas Turbines and Power, 134 (8). 082501. ISSN 0742-4795

Long, Christopher, Miles, Anna Louise and Coren, Daniel (2012) Windage measurements in a rotor stator cavity with rotor mounted protrusions and bolts. Proceedings of ASME Turbo Expo 2012.

Coren, D, Childs, P R N and Long, C A (2009) Windage sources in smooth-walled rotating disc systems. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 223 (4). pp. 873-888. ISSN 0954-4062

Cooke, A, Childs, P, Sayma, N and Long, C A (2009) A disc to air heat flux error and uncertainty analysis applied to a turbomachinery test rig design. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 223 (3). pp. 659-674. ISSN 0954-4062

Long, C A, Miche, N D D and Childs, P R N (2007) Flow Measurements inside a Heated Multiple Rotating Cavity with Axial Throughflow. International Journal of Heat and Fluid Flow, 28 (6). pp. 1391-1404. ISSN 0142-727X

Childs, P R N and Long, C A (2007) Shroud Heat Transfer Measurements Inside a Heated Multiple Rotating Cavity with Axial Throughflow. International Journal of Heat and Fluid Flow, 28 (6). pp. 1405-1417. ISSN 0142-727X

Peng, Z, New, P, Long, C A and Childs, P R N (2007) The Operating Characteristics of a High Radius Pre-swirl Cooling System. Journal of Aerospace Power, 22 (6). pp. 849-858. ISSN 1000-8055

Childs, Peter and Long, Christopher (2007) The effect of inlet conditions on the flow and heat transfer in a multiple rotating cavity with axial throughflow. Journal of Aerospace Power, 22 (5). pp. 683-693. ISSN 1000-8055

Long, C A, Childs, P R N, Greenwood, J R and Tham, K M (2004) Manufacture and calibration of robust heat flux sensors for rotating turbomachinery. Experimental Heat Transfer, 17 (3). pp. 181-197. ISSN 0891-6152

Long, C A, Childs, P R N, Greenwood, J R and Tham, K M (2004) Manufacture and Calibration of Rubust Heat Flux Sensors for Rotating Turbomachinery. International Journal of Experimental Heat Transfer, 17 (3). pp. 181-197. ISSN 0891-6152

Long, Christopher A, Turner, Alan B, Kais, Guven, Tham, Kok M and Verdicchio, John A (2003) Measurement and CFD Prediction of the Flow within an H P Compressor Drive Cone. Journal of Turbomachinery, 125 (1). pp. 165-172. ISSN 0889-504X

Hills, N J, Alexiou, A, Long, C A, Turner, A B, Wong, L-S and Millward, J A (2000) Discharge Coefficients for Flow Through Holes Normal to a Rotating Shaft. International Journal of Heat and Fluid Flow, 21 (6). pp. 701-709. ISSN 0142727X

Alexiou, A, Hills, N J, Long, C A, Turner, A B and Millward, J A (2000) Heat Transfer in HP Compressor Gas Turbine Internal Air Systems: a Rotating Disc-cone Cavity with Axial Throughflow. Experimental Heat Transfer, 13 No.. pp. 299-328. ISSN 0891-6152

Childs, P R N, Greenwood, J R and Long, C A (2000) Review of Temperature Measurement. Review of Scientific Instruments, 71. pp. 2959-2978. ISSN 0034-6748

Childs, P R N, Greenwood, J R and Long, C A (1999) Heat Flux Measurement Techniques. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 213 (7). pp. 655-677. ISSN 0954-4062

Tucker, P G and Long, C A (1998) Fluid Temperature Distribution in a Rotating Cavity with an Axial Throughflow. International Communications in Heat and Mass Transfer, 25 (4). pp. 511-520. ISSN 07351933

Turner, M T, Chew, J W and Long, C A (1998) Experimental Investigation and Mathematical Modelling of Clearance Brush Seals. Journal of Engineering for Gas Turbines and Power, 120 (3). pp. 573-579. ISSN 0742-4795

Long, C A, Morse, A P and Tucker, P G (1997) Measurement and Computation of Heat Transfer in High Pressure Compressor Drum Geometries with Axial Throughflow. Journal of Turbomachinery, 119 (1). pp. 51-60. ISSN 0889-504X

Tucker, P G and Long, C A (1996) Semi-implicit Second Order Finite Volume Jet Stream Computations. International Journal of Numerical Methods for Heat and Fluid Flow, 6 (6). pp. 39-50. ISSN 09615539

Childs, P R N and Long, C A (1996) A Review of Forced Convective Heat Transfer in Stationary and Rotating Annuli. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 210 (2). pp. 123-134. ISSN 0954-4062

Book Section

Dixon, J A, Valencia, A G, Coren, D, Eastwood, D and Long, C A (2012) Main annulus gas path interactions – turbine stator well heat transfer. In: Proceedings of the ASME Turbo Expo 2012. American Society of Mechanical Engineers, New York, NY, p. 68588. ISBN 9780791844670

Regan, N J, Atkins, N R and Long, C A (2009) An experimental study of sprays in cross flow representative of gas turbine engine secondary air systems. In: Proceedings of the ASME Turbo Expo 2009. Amer Soc Mechanical Engineers, pp. 133-143. ISBN 978-0-7918-4882-1

Reports and working papers

Long, Christopher (2005) Heat Transfer and Fluid Flow Measurements in the Sussex Multiple Cavity Rig. A Final Progress Report on the Work Carried out under Task 2 of the ICAS - GT2 Project. Project Report. Unset.

Conference or Workshop Item

Sharma, Tanay, Chatwin, Chris, Long, Christopher, Young, Rupert and Birch, Philip (2008) Alternative Space Vehicle Launch Systems. In: AIAA SPACE 2008 Conferance & Exposition, 9-11th Sept, 2008, San Diego, California.

Peng, Z, New, P, Long, C A and Childs, P R N (2007) An experimental investigation of a high radius pre-swirl cooling system. In: 8th International Symposium on Experimental and Computational Aerothermodynamics of Internal Flows, Lyon.

Cooke, Adam, Childs, Peter and Long, Christopher (2007) Investigation Into the Effect of Uncertainty in Thermal Properties on Turbomachinery Disc Heat Transfer Using Both a Monte Carlo Simulation Technique and a Taylor Series Uncertainty Propagation Method. In: ASME Turbo Expo 2007: Power for Land, Sea and Air, Montreal, Canada.

Childs, Peter, Cooke, Adam and Long, Christopher (2007) Evaluation of the effect of uncertainty in material properties on turbomachinery disc heat transfer using Monte Carlo simulation methods. In: ASME Turbo Expo 2007: Power for Land, Sea and Air., Montreal, Canada.

Peng, Z, New, P, Long, C A and Childs, P R N (2006) Operating characteristics of a high radius pre-swirl cooling system. In: International symposium on jet propulsion and power engineering, Kunming, China.

Cooke, A, Childs, P and Long, C (2006) An investigation into the uncertainty of turbomachinery disc heat transfer obtained via inverse analysis of temperature measurements. In: ASME Turbo Expo 2006, Barcelona, Spain.

Long, C A, Alexiou, A and Smout, P D (2003) Heat Transfer in H P Compressor Gas Turbine Internal Air Systems: Measurements from the Peripheral Shroud of a Rotating Cavity with Axial Throughflow. In: 2nd International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, Victoria Falls, Zambia.

Tham, Kok M, Long, Christopher A, Turner, Alan B, Childs, Peter and Dixon, JA (2003) Computation of the Flow in a H P Compressor Drive Cone Cavity. In: IGTC Conference, Tokyo.

Alexiou, A, Long, C A, Turner, A B and Barnes, C J (2001) Thermal Modelling of a Rotating Cavity Rig to Simulate the Internal Air System of a Gas Turbine H.P. Compressor. In: ExHFT 2001, Thessaloniki, Greece.

Alexiou, A, Hills, N J, Long, C A, Turner, A B and Millward, J A (2001) Heat Transfer in H.P. Compressor Internal Air Systems: a Rotating Disc-Cone Cavity with Axial Throughflow. In: Congres Francais de Thermique, SFT 2001, Nantes, Nantes.

Alexiou, A, Hills, N J, Long, C A, Turner, A B and Millward, J A (2000) Heat Transfer in a Rotating Disc-Cone Cavity with Axial Throughflow. In: Unset, 8th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery (ISROMAC-8) Hawaii.

This list was generated on Fri Dec 15 06:01:38 2017 GMT.