Article

He, Zhijing, Jiao, Chen, Wu, Junnan, Gu, Jiasen, Liang, Huixin, Shen, Lida, Yang, Youwen, Tian, Zongjun, Wang, Changjiang and Jiang, Qing (2023) Zn-doped chitosan/alginate multilayer coatings on porous hydroxyapatite scaffold with osteogenic and antibacterial properties. International Journal of Bioprinting, 9 (2). pp. 292-305. ISSN 2424-7723

Zhang, Ran, Wang, Qinyi, Chen, Ya, Jiao, Chen, Liu, Fuxi, Xu, Junwei, Zhang, Qiuwei, Zhao, Jiantao, Shen, Lida and Wang, Changjiang (2022) Biosensors fabricated by laser-induced metallization on DLP composite resin. Electronics, 11 (19). a3254 1-13. ISSN 2079-9292

Chen, Ya, Xu, Junwei, Shen, Lida, Zhao, Jiantao, Chen, Jingsong, Yang, Youwen, Wang, Lin, Zhao, Jianfeng and Wang, Changjiang (2022) Tunable wettability of jet electrodeposited micro-nano structures modified by laser radiation. Surface and Coatings Technology. a128763. ISSN 0257-8972

He, Zhijing, Jiao, Chen, Zhang, Hanxu, Xie, Dieqiao, Ge, Mengxing, Yang, Youwen, Wu, Guofeng, Liang, Huixin, Shen, Lida and Wang, Changjiang (2022) Fabrication of a zirconia/calcium silicate composite scaffold based on digital light processing. Ceramics International. ISSN 0272-8842

Jiao, Chen, Xie, Deqiao, He, Zhijing, Liang, Huixin, Shen, Lida, Yang, Youwen, Tian, Zongjun, Wu, Guofeng and Wang, Changjiang (2022) Additive manufacturing of bio-inspired ceramic bone scaffolds: structural design, mechanical properties and biocompatibility. Materials & Design, 217. a110610 1-12. ISSN 0264-1275

Arjunan, Arun, Singh, Manpreet, Baroutaji, Ahmad and Wang, Chang (2020) Additively manufactured AlSi10Mg inherently stable thin and thick-walled lattice with negative Poisson’s ratio. Composite Structures, 247. a112469. ISSN 0263-8223

Du, Yue, Liang, Huixin, Xie, Deqiao, Mao, Ning, Zhao, Jianfeng, Tian, Zongjun, Wang, Changjiang and Shen, Lida (2020) Design and statistical analysis of irregular porous scaffolds for orthopedic reconstruction based on Voronoi tessellation and fabricated via selective laser melting (SLM). Materials Chemistry and Physics, 239. p. 121968. ISSN 0254-0584

Cui, Weiling, Wang, Changjiang, Chen, Weiyi, Guo, Yuan, Jia, Yi, Du, Weijin and Wang, Chenyan (2019) Effects of toe-out and toe-in gaits on lower-extremity kinematics, dynamics, and electromyography. Applied Sciences, 9 (23). pp. 1-22. ISSN 2076-3417

Yang, Tao, Xie, Deqiao, Yue, Wenchao, Wang, Shuang, Rong, Peng, Shen, Lida, Zhao, Jianfeng and Wang, Changjiang (2019) Distortion of thin-walled structure fabricated by selective laser melting based on assumption of constraining force-induced distortion. Metals, 9 (12). pp. 1-11. ISSN 2075-4701

Arjunan, Arun, Demetriou, Marios, Baroutaji, Ahmad and Wang, Chang (2019) Mechanical performance of highly permeable laser melted Ti6Al4V bone scaffolds. Journal of the Mechanical Behavior of Biomedical Materials. p. 103517. ISSN 1751-6161

Li, Yize, Liang, Huixin, Tian, Zongjun, Yang, Youwen, Xie, Deqiao, Zhu, Lei, Shen, Lida and Wang, Changjiang (2019) Mechanical properties of in-situ synthesis of Ti-Ti3Al metal composite prepared by selective laser melting. Metals, 9 (10). p. 1121. ISSN 2075-4701

Cao, Ying, Shi, Tianshu, Jiao, Chen, Liang, Huixin, Chen, Ruoyu, Tian, Zongjun, Zou, Anchao, Yang, Youwen, Wei, Zhen, Wang, Changjiang and Shen, Lida (2019) Fabrication and properties of zirconia/hydroxyapatite composite scaffold based on digital light processing. Ceramics International. ISSN 02728842

Wang, Kai, Qiu, Mingbo, Jiao, Chen, Gu, Jiajun, Xie, Deqiao, Wang, Changjiang, Tang, Xiaobing, Wei, Zhen and Shen, Lida (2019) Study on defect-free debinding green body of ceramic formed by DLP technology. Ceramics International. ISSN 02728842

Liu, Qingrong, Qiu, Mingbo, Shen, Lida, Jiao, Chen, Ye, Yun, Xie, Deqiao, Wang, Changjiang, Xiao, Meng and Zhao, Jianfeng (2019) Additive manufacturing of monolithic microwave dielectric ceramic filters via digital light processing. Electronics, 8 (10). a1067. ISSN 2079-9292

Du, Yue, Liang, Huixin, Xie, Deqiao, Mao, Ning, Zhao, Jianfeng, Tian, Zongjun, Wang, Changjiang and Shen, Lida (2019) Finite element analysis of mechanical behavior, permeability of irregular porous scaffolds and lattice-based porous scaffolds. Materials Research Express. ISSN 2053-1591

Wang, Linjie and Wang, Chang Jiang (2019) Preliminary study of a customised total knee implant with musculoskeletal and dynamic squatting simulation. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine. ISSN 0954-4119

Liang, Huixin, Yang, Youwen, Xie, Deqiao, Li, Lan, Mao, Ning, Wang, ChangJiang, Tian, Zongjun, Jiang, Qing and Shen, Lida (2019) Trabecular-like Ti-6Al-4V scaffolds for orthopedic: fabrication by selective laser melting and in vitro biocompatibility. Journal of Materials Science & Technology, 35 (7). pp. 1284-1297. ISSN 1005-0302

Liu, Zibo, Liang, Huixin, Shi, Tianshu, Xie, Deqiao, Chen, Ruoyu, Han, Xiao, Shen, Lida, Wang, Changjiang and Tian, Zongjun (2019) Additive manufacturing of hydroxyapatite bone scaffolds via digital light processing and in vitro compatibility. Ceramics International, 45 (8). pp. 11079-11086. ISSN 0272-8842

Liang, Huixin, Xie, Deqiao, Mao, Yuyi, Shi, Jianping, Wang, Changjiang, Shen, Lida and Tian, Zongjun (2019) The size effect on forming quality of Ti–6Al–4V solid struts fabricated via laser powder bed fusion. Metals, 9 (4). 416 1-12. ISSN 2075-4701

Wang, Xiao, Xu, Mingyang, Wang, Zhanwen, Shen, Lida, Qiu, Mingbo, Tian, Zongjun, Ahsan, Muhammad Naveed and Wang, Changjiang (2019) Properties of jet-plated Ni coating on Ti alloy (Ti6Al4V) with laser cleaning pretreatment. Metals, 9 (2). 248 1-12. ISSN 2075-4701

Lv, Fei, Shen, Lida, Liang, Huixin, Xie, Deqiao, Wang, Changjiang and Tian, Zongjun (2019) Mechanical properties of AlSi10Mg alloy fabricated by laser melting deposition and improvements via heat treatment. Optik, 179. pp. 8-18. ISSN 0030-4026

Xie, Deqiao, Zhao, Jianfeng, Liang, Huixin, Liu, Shuang, Tian, Zongjun, Shen, Lida and Wang, Changjiang (2018) Cause of angular distortion in fusion welding: asymmetric cross-sectional profile along thickness. Materials, 12 (1). 58 1-14. ISSN 1996-1944

Xie, Deqiao, Zhao, Jianfeng, Liang, Huixin, Tian, Zongjun, Shen, Lida, Xiao, Meng, Ahsan, Muhammad Naveen and Wang, Changjiang (2018) Assumption of constraining force to explain distortion in laser additive manufacturing. Materials, 11 (11). p. 2327. ISSN 1996-1944

Zhu, Yiyun, Fan, Xiaona, Wang, Changjiang and Sang, Guochen (2018) Analysis of heat transfer and thermal environment in a rural residential building for addressing energy poverty. Applied Sciences, 8 (11). 2077 1 -13. ISSN 2076-3417

Gao, Guijun, Wang, Changjiang and Kou, Ziming (2018) Experimental studies on the spraying pattern of a swirl nozzle for coal dust control. Applied Sciences, 8 (10). 1770 1-14. ISSN 2076-3417

Liang, Ce, Wang, Chang, English, Martin and Mynors, Diane (2018) Behaviour of cold-formed dimpled columns under lateral impact. Engineering Structures, 163. pp. 167-176. ISSN 0141-0296

Wang, Guanjun, Shen, Lida, Zhao, Jianfeng, Liang, Huixin, Xie, Deqiao, Tiang, Zongjun and Wang, Changjiang (2018) Design and compressive behavior of controllable irregular porous scaffolds: based on Veronoi-tessellation and for additive manufacturing. ACS Biomaterials Science & Engineering, 4 (2). pp. 719-727. ISSN 2373-9878

Li, Xinyu, Wang, Chang, Guo, Yuan and Chen, Weiyi (2017) An approach to developing customized total knee replacement implants. Journal of Healthcare Engineering, 2017 (92980). pp. 1-8. ISSN 2040-2295

Wang, Chang, Guo, Yuan, Shi, Junfen and Chen, Weiyi (2017) A numerical investigation into the effects of overweight and obesity on total knee arthroplasty. Journal of Healthcare Engineering, 2017. pp. 1-8. ISSN 2040-2295

Liang, Ce, Wang, Chang Jiang, Nguyen, Van Bac, English, Martin and Mynors, Diane (2017) Experimental and numerical study on crashworthiness of cold-formed dimpled steel columns. Thin-Walled Structures, 112. pp. 83-91. ISSN 0263-8231

Nguyen, V B, Mynors, D J, Wang, C J, Castellucci, M A and English, M A (2016) Analysis and design of cold-formed dimpled steel columns using Finite Element techniques. Finite Elements in Analysis and Design, 108. pp. 22-31. ISSN 0168-874X

Zhu, Yiyun, Wang, Chang Jiang and Mynors, Diane (2016) Applications and engineering analysis of lotus roots under external water pressure. Applied Bionics and Biomechanics, 2016. p. 2386982. ISSN 1176-2322

Arjunan, Arun, Wang, Chang, English, Martin, Stanford, Mark and Lister, Paul (2015) A computationally-efficient numerical model to characterize the noise behavior of metal-framed walls. Metals, 5 (3). pp. 1414-1431. ISSN 2075-4701

Arjunan, A, Wang, C J, Yahiaoui, K, Mynors, D, Morgan, T, Nguyen, V B and English, M (2014) Development of a 3D finite element acoustic model to predict the sound reduction index of stud based double-leaf walls. Journal of Sound and Vibration, 333 (23). pp. 6140-6155. ISSN 0022-460X

Hazlehurst, Kevin Brian, Wang, Chang Jiang and Stanford, Mark (2014) An investigation into the flexural characteristics of functionally graded cobalt chrome femoral stems manufactured using selective laser melting. Materials & Design, 60. pp. 177-183. ISSN 0261-3069

Nguyen, V B, Wang, C J, Mynors, D J, English, M A and Castellucci, M A (2014) Dimpling process in cold roll metal forming by finite element modelling and experimental validation. Journal of Manufacturing Processes, 16 (3). pp. 363-372. ISSN 1526-6125

Hazlehurst, Kevin Brian, Wang, Chang Jiang and Stanford, Mark (2014) A numerical investigation into the influence of the properties of cobalt chrome cellular structures on the load transfer to the periprosthetic femur following total hip arthroplasty. Medical Engineering & Physics, 36 (4). pp. 458-466. ISSN 1350-4533

Wang, Chang Jiang and Mynors, Diane (2014) Hydrostatic stress and triaxiality factors in a lotus root cross section. Applied Mechanics and Materials, 461. pp. 230-234. ISSN 1660-9336

Wang, Chang Jiang, Choon, Jin Li and Kibble, Kevin (2014) Structural integrity analysis of hole shape and location in lotus root. Applied Mechanics and Materials, 461. pp. 81-84. ISSN 1660-9336

Ye, W, Wang, C J, Mynors, D J, Kibble, K A, Morgan, T and Cartwright, B (2013) Load–deflection behaviour of sleeved joints in modified Z purlin system. Thin-Walled Structures, 73. pp. 318-328. ISSN 0263-8231

Hazlehurst, K B, Wang, C J and Stanford, M (2013) The potential application of a Cobalt Chrome Molybdenum femoral stem with functionally graded orthotropic structures manufactured using Laser Melting technologies. Medical Hypotheses, 81 (6). pp. 1096-1099. ISSN 0306-9877

Hazlehurst, Kevin, Wang, Chang Jiang and Stanford, Mark (2013) Evaluation of the stiffness characteristics of square pore CoCrMo cellular structures manufactured using laser melting technology for potential orthopaedic applications. Materials & Design, 51. pp. 949-955. ISSN 0261-3069

Arjunan, A, Wang, C J, Yahiaoui, K, Mynors, D J, Morgan, T and English, M (2013) Finite element acoustic analysis of a steel stud based double-leaf wall. Building and Environment, 67. pp. 202-210. ISSN 0360-1323

Nguyen, V B, Wang, C J, Mynors, D J, Castellucci, M A and English, M A (2013) Finite element simulation on mechanical and structural properties of cold-formed dimpled steel. Thin-Walled Structures, 64. pp. 13-22. ISSN 0263-8231

Wang, Xin, Wang, Changjiang and Atkinson, Alan (2012) Interface fracture toughness in thermal barrier coatings by cross-sectional indentation. Acta Materialia, 60 (17). pp. 6152-6163. ISSN 1359-6454

Nguyen, V B, Wang, C J, Mynors, D J, English, M A and Castellucci, M (2012) Compression tests of cold-formed plain and dimpled steel columns. Journal of Constructional Steel Research, 69 (1). pp. 1072-1077. ISSN 0143-974X

Nguyen, Van Bac, Wang, Chang, Mynors, Diane, English, Martin and Castellucci, Michael (2011) Mechanical properties and structural behaviour of cold-roll formed dimpled steel. Steel Research International (Specia). pp. 1072-1077. ISSN 9783514007840

Wang, Chang J, Tang, Guo Ning, Roberts, Ibiye A and Mynors, Diane J (2011) Structural analysis of the first iron bridge in the world using the finite element method. Applied Mechanics and Materials, 147. pp. 62-65. ISSN 1662-7482

Wang, Chang J, Shi, Jun F, Morgan, Colin and Mynors, Diane J (2010) Design and simulation of a femoral component peg in total knee replacement. Key Engineering Materials, 450. pp. 111-114. ISSN 1662-9795

Roberts, I A, Wang, C J, Esterlein, R, Stanford, M and Mynors, D J (2009) A three-dimensional finite element analysis of the temperature field during laser melting of metal powders in additive layer manufacturing. International Journal of Machine Tools and Manufacture, 49 (12-13). pp. 916-923. ISSN 0890-6955

Shi, J F, Wang, C J, Berryman, F and Hart, W (2008) The effect of polyethylene thickness in fixed- and mobile-bearing total knee replacements. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, 222 (5). pp. 657-667. ISSN 0954-4119

Shi, J F, Wang, C J, Laoui, T, Hart, W and Hall, R (2007) A dynamic model of simulating stress distribution in the distal femur after total knee replacement. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, 221 (8). pp. 903-912. ISSN 0954-4119

Brown, C J, Wang, C J, Yettram, A L and Procter, P (2004) Intramedullary nails with two lag screws. Clinical Biomechanics, 19 (5). pp. 519-525. ISSN 02680033

Wang, C J, Brown, C J, Yettram, A L and Procter, P (2003) Intramedullary nails: some design features of the distal end. Medical Engineering & Physics, 25 (9). pp. 789-794. ISSN 1350-4533

Chen, Yaolong, Wang, Changjiang, Li, Shouyi, Wang, Ruijun and He, Jing (2001) Simulation analysis of thermal stress of RCC dams using 3-D finite element relocating mesh method. Advances in Engineering Software, 32 (9). pp. 677-682. ISSN 0965-9978

Wang, C J, Brown, C J, Yettram, A L and Procter, P (2000) Intramedullary femoral nails: one or two lag screws? A preliminary study. Medical Engineering & Physics, 22 (9). pp. 613-624. ISSN 1350-4533

Wang, C J, Yettram, A L, Yao, M S and Procter, P (1998) Finite element analysis of a Gamma nail within a fractured femur. Medical Engineering & Physics, 20 (9). pp. 677-683. ISSN 1350-4533

Book Section

Arjunan, Arun, Praveen, Ayyappan S, Olabi, Abdul G and Wang, Chang J (2019) Acoustic performance of metallic foams. In: Reference module in materials science and materials engineering. Elsevier, pp. 1-16. ISBN 9780128035818

Wang, Chang Jiang and Hazlehurst, Kevin B (2019) Orthopaedic implant design and analysis: potential of 3D/4D bioprinting. In: Maniruzzaman, Mohammed (ed.) 3D and 4D printing in biomedical applications: process engineering and additive manufacturing. Wiley-VCH, pp. 423-442. ISBN 9783527344437

Wang, C, Chen, W, Guo, Y, Yue, B and Zeng, Y (2018) Biomechanics of knee joint. In: Zhang, X and Tang, T (eds.) Biomechanics of bone and joints (in Chinese). Shanghai Jiaotong University, Shanghai, pp. 215-237. ISBN 978-7-313-18500-6

Wang, Chang Jiang and Mynors, Diane (2016) Acoustic performance of cold-formed steel buildings. In: Yu, Cheng (ed.) Recent trends in cold-formed steel construction. Woodhead Publishing. ISBN 9780081009604

Conference or Workshop Item

Liang, C, Wang, C J, Nguyen, V B and Mynors, D J (2016) Explicit dynamics finite element analysis of energy absorption characteristics of thin-walled UltraSTEEL columns. In: 24th Conference on Computational Mechanics, 31 Mar - 1 Apr 2016, Cardiff, UK.

Arjunan, A, Wang, C J, Mynors, D J, Yahiaoui, K, Morgan, T and English, M (2013) Thermal efficiency analysis of slotted steel studs in double leaf partition walls using FEM and experimental tests. In: NAFEMS World Congress, 9-12 June 2013, Salzburg, Austria.

Hazlehurst, Kevin, Wang, Chang Jiang and Stanford, Mark (2013) A numerical investigation into the application of an orthotropic porous structure for a femoral stem manufactured using laser melting technology. In: 19th Congress of the European Society of Biomechanics, 25-28 August 2013, Patras, Greece.

Conference Proceedings

Coulthard, James and Wang, Chang (2022) Generative design and topology optimisation of products for additive manufacturing. The 19th International Conference in Manufacturing Research, Berby, 6 Sep 2022 - 8 Sep 2022. Published in: Shafik, M and Case, K, (eds.) Advances in Manufacturing Technology XXXV. 25 81-86. IOS Press ISBN 9781643683317

Wang, Chang Jiang, Hazlehurst, Kevin, Arjunan, Arun and Shen, Lida (2021) Analysis of the porous structures from laser powder bed fusion additive manufacturing. 18th International Conference in Manufacturing Research, Derby, 7 - 10 September 2021. Published in: Advances in Manufacturing Technology XXXIV. 15 97-102. IOP Press ISSN 2352-751X ISBN 9781643681986

Liang, Ce, Wang, Chang Jiang, English, Martin and Mynors, Diane (2017) Optimization of the UltraSTEEL dimpling forming process for energy absorption. 12th International Conference on the Technology of Plasticity, ICTP 2017,, Cambridge, United Kingdom, 17-22 September 2017. Published in: Procedia Engineering. 207 1284-1289. Elsevier ISSN 1877-7058