Dimpling process in cold roll metal forming by finite element modelling and experimental validation

Nguyen, V B, Wang, C J, Mynors, D J, English, M A and Castellucci, M A (2014) Dimpling process in cold roll metal forming by finite element modelling and experimental validation. Journal of Manufacturing Processes, 16 (3). pp. 363-372. ISSN 1526-6125

[img]
Preview
PDF - Accepted Version
Download (2MB) | Preview

Abstract

The dimpling process is a novel cold-roll forming process that involves dimpling of a rolled flat strip prior to the roll forming operation. This is a process undertaken to enhance the material properties and subsequent products’ structural performance while maintaining a minimum strip thickness. In order to understand the complex and interrelated nonlinear changes in contact, geometry and material properties that occur in the process, it is necessary to accurately simulate the process and validate through physical tests. In this paper, 3D non-linear finite element analysis was employed to simulate the dimpling process and mechanical testing of the subsequent dimpled sheets, in which the dimple geometry and material properties data were directly transferred from the dimpling process. Physical measurements, tensile and bending tests on dimpled sheet steel were conducted to evaluate the simulation results. Simulation of the dimpling process identified the amount of non-uniform plastic strain introduced and the manner in which this was distributed through the sheet. The plastic strain resulted in strain hardening which could correlate to the increase in the strength of the dimpled steel when compared to plain steel originating from the same coil material. A parametric study revealed that the amount of plastic strain depends upon on the process parameters such as friction and overlapping gap between the two forming rolls. The results derived from simulations of the tensile and bending tests were in good agreement with the experimental ones. The validation indicates that the finite element analysis was able to successfully simulate the dimpling process and mechanical properties of the subsequent dimpled steel products.

Item Type: Article
Keywords: Cold-rolled; Dimpling process; Finite element modelling; Plastic strain; Mechanical testing
Schools and Departments: School of Engineering and Informatics > Engineering and Design
Subjects: T Technology > TA Engineering (General). Civil engineering (General) > TA0349 Mechanics of engineering. Applied mechanics
Depositing User: Chang Wang
Date Deposited: 13 Jun 2014 06:49
Last Modified: 07 Mar 2017 04:16
URI: http://sro.sussex.ac.uk/id/eprint/48964

View download statistics for this item

📧 Request an update